|
Go Back to...
Aluminum Roll Up Awnings (5500)

Step - 1 Using chart below, Choose the DROP that best suits your needs. This will determine how far down the window the awning will come. The DROP associated with the "Window Height" (A) is only a suggestion. You may choose any of the drops within the table you wish.
Step - 2 Measure of window casing - center to center (B). If you mount the awning on the window casing (frame), this measurement is what you need. If you wish to mount the awning on the house wall then you need to add, at least, 1-1/2" on to each side of an "edge to edge" measurement to determine the final measurement. The extra inches are to account for the hardware that would be mounted beside the frame. Awnings cannot be mounted on shutters.
Step-3 Color and Pattern Choices:
Select color
& pattern that best compliments
your home, from our selection.
1. Canopies are available in solid or stripped pattern (No additional cost)
2. Undersides of all aluminum canopies are white only
Note: Special Orders in Custom widths from 85" to 120", in one piece, in 1" increments are available. Call
(800) 922-4760 for pricing on special sizes
|
Awning Model # |
0 |
1 |
2 |
3 |
4 |
|
For Window Heights of: |
36" |
46" |
56" |
66" |
76" |
|
Projection |
18" |
24" |
30" |
35" |
42" |
|
Drop Approx. |
27" |
33" |
39" |
44" |
51" |
Step-4 To Order - Call 1-800-922-4760
with the following information
| |
Step-1 |
Step-2 |
Step-3 |
|
Quantity |
Aluminum Window Awning
Model#
(Series 5500) |
Awning Width |
Base
Color |
Accent
Color |
Sidewing
Color |
|
_____ |
______ |
______ |
_______ |
_______ |
__N/A____ |
Go Back to...
Aluminum Roll Up Awnings (5500)
|