The roof is a specially designed 'snap-lock system. VERY easy to assemble and completely water tight! Shown here with the blue protective tape for shipping purposes.
This is a cutaway of the roof section. It is available in 3", 4" & 6" thicknesses all with the specially formulated polystyrene core with an .024 laminated aluminum skin on both sides. Shown here with the extruded aluminum fascia screwed into place.
This is the top view of your insulated roof. The gutter shown in this picture will be at the front of your new screened enclosure.
Inside your front fascia gutter!
This is the bottom view of your insulated roof.
Suggested spacing between verticals is 36" to 44". This customer chose a larger vertical spacing and therefore used two mullions (horizontal supports) to make sure the screen panels remain strong and rigid.
A great shot of a 'room in progress'... Note that with a little bit of precision cutting you can wrap your back-wall assembly around a bump-out on the house wall.
H122 - Vertical supports
H121 - Horizontal supports...top, bottom and mullion
H120 - Used in place of the H122 on a corner
H123 - top and bottom U channels
Do-It-Yourself Kits Toll Free Order line
We eliminate security risks!
or
Save
Money - Do It Yourself
Canadian residents
US
Dollars /
Call
1.800.922.4760 to order
now!